Port Closed

Ask for help and report issues not specific to either the Mac OS X or GTK+ versions of Transmission
Post Reply
BlackHole
Posts: 1
Joined: Sat Jan 09, 2010 1:56 am

Port Closed

Post by BlackHole »

I have a MacBookPro, 2.53GHz, Airport Extreme connected to the condo's internet, which is connected to the provider via radio waves: ip2.com.br

Here's the debug log:

2010-01-08 23:53:53 -0200 port-forwarding.c:166 [Info] Port Forwarding: Stopped
2010-01-08 23:53:53 -0200 natpmp.c:68 [Info] Port Forwarding (NAT-PMP): readnatpmpresponseorretry succeeded (0)
2010-01-08 23:53:53 -0200 natpmp.c:137 [Info] Port Forwarding (NAT-PMP): Found public address "10.2.20.76"
2010-01-08 23:53:53 -0200 port-forwarding.c:88 [Info] Port Forwarding: State changed from "Starting" to "Not forwarded"
2010-01-08 23:54:06 -0200 natpmp.c:68 [Info] Port Forwarding (NAT-PMP): initnatpmp succeeded (0)
2010-01-08 23:54:06 -0200 natpmp.c:68 [Info] Port Forwarding (NAT-PMP): sendpublicaddressrequest succeeded (2)
2010-01-08 23:54:14 -0200 upnp.c:97 [Debug] Port Forwarding (UPnP): upnpDiscover failed (errno 2 - No such file or directory)
2010-01-08 23:54:14 -0200 upnp.c:117 [Debug] Port Forwarding (UPnP): UPNP_GetValidIGD failed (errno 0 - Unknown error: 0)
2010-01-08 23:54:14 -0200 upnp.c:120 [Debug] Port Forwarding (UPnP): If your router supports UPnP, please make sure UPnP is enabled!
2010-01-08 23:54:14 -0200 port-forwarding.c:88 [Info] Port Forwarding: State changed from "Not forwarded" to "Starting"

Any help would be deeply appreciated.
essiw
Posts: 567
Joined: Sat Aug 23, 2008 10:40 am
Location: the Netherlands

Re: Port Closed

Post by essiw »

did you read the guides that are in my signature? If not you should read them :)
gbishop
Posts: 1
Joined: Sat Jan 16, 2010 7:35 pm

Re: Port Closed

Post by gbishop »

essiw wrote:did you read the guides that are in my signature? If not you should read them :)
If he's running Snow Leopard (as I am) your guides aren't a lot of help because the system pref/sharing control panel has been redesigned and doesn't contain the same options anymore.
Post Reply