port is closed

Feature requests for the Mac OS X version of Transmission
Post Reply
xcell
Posts: 3
Joined: Tue Dec 02, 2008 3:33 am

port is closed

Post by xcell »

I follwed the Transmission Help but my port is still closed - I guess the log below shows that forwarding the port worked:

2010-11-07 18:26:53 +0700 port-forwarding.c:184 [Info] Port Forwarding: Stopped
2010-11-07 18:26:53 +0700 upnp.c:167 [Info] Port Forwarding (UPnP): Stopping port forwarding through "http://192.168.10.1:2555/upnp/ea9e1281- ... PConn1.ctl", service "urn:schemas-upnp-org:service:WANIPConnection:1"
2010-11-07 18:26:53 +0700 port-forwarding.c:95 [Info] Port Forwarding: State changed from "Forwarded" to "Not forwarded"
2010-11-07 18:27:01 +0700 natpmp.c:70 [Info] Port Forwarding (NAT-PMP): initnatpmp succeeded (0)
2010-11-07 18:27:01 +0700 natpmp.c:70 [Info] Port Forwarding (NAT-PMP): sendpublicaddressrequest succeeded (2)
2010-11-07 18:27:01 +0700 upnp.c:113 [Info] Port Forwarding (UPnP): Found Internet Gateway Device "http://192.168.10.1:2555/upnp/ea9e1281- ... PConn1.ctl"
2010-11-07 18:27:01 +0700 upnp.c:115 [Info] Port Forwarding (UPnP): Local Address is "192.168.10.xxx"
2010-11-07 18:27:01 +0700 upnp.c:202 [Info] Port Forwarding (UPnP): Port forwarding through "http://xxxxx:2555/upnp/ea9e1281-2401b50 ... PConn1.ctl", service "urn:schemas-upnp-org:service:WANIPConnection:1". (local address: xxxxxxx1)
2010-11-07 18:27:01 +0700 upnp.c:205 [Info] Port Forwarding (UPnP): Port forwarding successful!
2010-11-07 18:27:01 +0700 port-forwarding.c:95 [Info] Port Forwarding: State changed from "Not forwarded" to "Forwarded"
2010-11-07 18:27:05 +0700 bencode.c:1681 [Debug] Transmission: Writing 149 bytes to temporary file "/Users/xxxxxLibrary/Application Support/Transmission/stats.json.tmp.bW7XbI"
2010-11-07 18:27:05 +0700 bencode.c:1693 [Debug] Transmission: Renaming "/Users/xxxxxx/Library/Application Support/Transmission/stats.json.tmp.bW7XbI" as "/Users/xxxx/Library/Application Support/Transmission/stats.json"
2010-11-07 18:27:05 +0700 bencode.c:1697 [Info] Transmission: Saved "/Users/xxxxxx/Library/Application Support/Transmission/stats.json"
trippelato
Posts: 1
Joined: Sun Nov 07, 2010 4:10 pm

Re: port is closed

Post by trippelato »

SAME PROBLEM FOR ME
2010-11-07 17:18:21 +0100 tr-dht.c:252 [Debug] DHT: Finished bootstrapping
2010-11-07 17:06:41 +0100 upnp.c:128 [Debug] Port Forwarding (UPnP): If your router supports UPnP, please make sure UPnP is enabled!
2010-11-07 17:06:41 +0100 natpmp.c:70 [Info] Port Forwarding (NAT-PMP): initnatpmp succeeded (0)
2010-11-07 17:06:49 +0100 natpmp.c:75 [Debug] Port Forwarding (NAT-PMP): readnatpmpresponseorretry failed. natpmp returned -7 (the gateway does not support nat-pmp); errno is 61 (Connection refused)
2010-11-07 17:29:09 +0100 platform.c:526 [Info] Transmission: Searching for web interface file "/Applications/Transmission.app/Contents/Resources/web/index.html"
2010-11-07 17:29:09 +0100 platform.c:526 [Info] Transmission: Searching for web interface file "/Users/admin/Library/Application Support/Transmission/web/index.html"
2010-11-07 17:06:41 +0100 natpmp.c:70 [Info] Port Forwarding (NAT-PMP): sendpublicaddressrequest succeeded (2)
2010-11-07 17:06:41 +0100 port-forwarding.c:95 [Info] Port Forwarding: State changed from "Not forwarded" to "Starting"
2010-11-07 17:06:49 +0100 port-forwarding.c:95 [Info] Port Forwarding: State changed from "Starting" to "???"
2010-11-07 17:06:37 +0100 port-forwarding.c:184 [Info] Port Forwarding: Stopped
2010-11-07 17:06:41 +0100 upnp.c:125 [Debug] Port Forwarding (UPnP): UPNP_GetValidIGD failed (errno 0 - Unknown error: 0)
2010-11-07 17:06:41 +0100 upnp.c:105 [Debug] Port Forwarding (UPnP): upnpDiscover failed (errno 2 - No such file or directory)
PLEASE HELP!!!!!!
slimtimslide
Posts: 1
Joined: Thu Nov 25, 2010 7:00 pm

Re: port is closed

Post by slimtimslide »

ditto...

cant some kind person explain how to solve this - im using osx10.6 and have no idea how to change, or select, a port - the randomize feaure in transmission has acheived nothing and im at a loss - when i used transmission on my old G4 (osx10.3.9) i never had a problem, what am i doing wrong? xxxxxxx
litsan
Posts: 4
Joined: Sat Feb 05, 2011 2:01 pm

Re: port is closed

Post by litsan »

I have the same problem despite doing all that's required about port forwarding, NAT, etc. However, I run an Airport Extreme and extend my wireless network in the house using an Airport Express. I connect this computer via my Airport Express in the hall. Even when I switch that off, there is a weak signal to my Extreme, the same "port closed" results.

My debug log is as follows. Hope I get help.....btw my torrent site requires that I seed back (which is now prevented) and am using Transmission v2.20b3. Thanks.

Lit
Debug log:
"2011-02-05 21:57:50 +0800 port-forwarding.c:183 [Info] Port Forwarding: Stopped
2011-02-05 21:57:50 +0800 natpmp.c:70 [Info] Port Forwarding (NAT-PMP): sendnewportmappingrequest succeeded (12)
2011-02-05 21:57:50 +0800 port-forwarding.c:95 [Info] Port Forwarding: State changed from "Forwarded" to "Stopping"
2011-02-05 21:57:55 +0800 natpmp.c:70 [Info] Port Forwarding (NAT-PMP): initnatpmp succeeded (0)
2011-02-05 21:57:55 +0800 natpmp.c:70 [Info] Port Forwarding (NAT-PMP): sendpublicaddressrequest succeeded (2)
2011-02-05 21:57:55 +0800 upnp.c:105 [Debug] Port Forwarding (UPnP): upnpDiscover failed (errno 2 - No such file or directory)
2011-02-05 21:57:55 +0800 upnp.c:125 [Debug] Port Forwarding (UPnP): UPNP_GetValidIGD failed (errno 0 - Unknown error: 0)
2011-02-05 21:57:55 +0800 upnp.c:128 [Debug] Port Forwarding (UPnP): If your router supports UPnP, please make sure UPnP is enabled!
2011-02-05 21:57:55 +0800 port-forwarding.c:95 [Info] Port Forwarding: State changed from "Not forwarded" to "Starting"
2011-02-05 21:58:03 +0800 natpmp.c:70 [Info] Port Forwarding (NAT-PMP): readnatpmpresponseorretry succeeded (0)
2011-02-05 21:58:03 +0800 natpmp.c:138 [Info] Port Forwarding (NAT-PMP): Found public address "218.212.110.34"
2011-02-05 21:58:03 +0800 natpmp.c:70 [Info] Port Forwarding (NAT-PMP): sendnewportmappingrequest succeeded (12)
2011-02-05 21:58:04 +0800 natpmp.c:70 [Info] Port Forwarding (NAT-PMP): readnatpmpresponseorretry succeeded (0)
2011-02-05 21:58:04 +0800 natpmp.c:218 [Info] Port Forwarding (NAT-PMP): Port 52025 forwarded successfully
2011-02-05 21:58:04 +0800 port-forwarding.c:95 [Info] Port Forwarding: State changed from "Starting" to "Forwarded""
Post Reply