Cant acces WGUI from internet

Discussion of the Web Interface for Transmission, formerly known as Clutch. This applies to all version of Transmission
Post Reply
achlebin
Posts: 1
Joined: Wed Nov 11, 2009 12:50 am

Cant acces WGUI from internet

Post by achlebin »

Hi I am using transmision and till I tried it from my LAN it worked like a charm but now it is imposible. I Get time out whenever I try to log to http://MY_IP:9091
I am runing transmission or asus router WL500W
settings.json

Code: Select all

{
    "alt-speed-down": 50, 
    "alt-speed-enabled": false, 
    "alt-speed-time-begin": 540, 
    "alt-speed-time-day": 127, 
    "alt-speed-time-enabled": false, 
    "alt-speed-time-end": 1020, 
    "alt-speed-up": 50, 
    "bind-address-ipv4": "0.0.0.0", 
    "bind-address-ipv6": "::", 
    "blocklist-enabled": true, 
    "dht-enabled": true, 
    "download-dir": "\/tmp\/harddisk\/transmission\/download", 
    "encryption": 2, 
    "lazy-bitfield-enabled": true, 
    "message-level": 2, 
    "open-file-limit": 64, 
    "peer-limit-global": 250, 
    "peer-limit-per-torrent": 60, 
    "peer-port": 51413, 
    "peer-port-random-enabled": false, 
    "peer-port-random-high": 65535, 
    "peer-port-random-low": 1024, 
    "peer-port-random-on-start": false, 
    "peer-socket-tos": 8, 
    "pex-enabled": true, 
    "port-forwarding-enabled": false, 
    "preallocation": 1, 
    "proxy": "", 
    "proxy-auth-enabled": false, 
    "proxy-auth-password": "", 
    "proxy-auth-username": "", 
    "proxy-enabled": false, 
    "proxy-port": 80, 
    "proxy-type": 0, 
    "ratio-limit": 2.0000, 
    "ratio-limit-enabled": false, 
    "rpc-authentication-required": false, 
    "rpc-bind-address": "0.0.0.0", 
    "rpc-enabled": true, 
    "rpc-password": "{49c5b153c05db9e39bf8f42ae5517ef6bce0a39cC9n\/U55G", 
    "rpc-port": 9091, 
    "rpc-username": "ach", 
    "rpc-whitelist": "127.0.0.1,192.168.1.*,*.*.*.*", 
    "rpc-whitelist-enabled": true, 
    "speed-limit-down": 500, 
    "speed-limit-down-enabled": false, 
    "speed-limit-up": 6, 
    "speed-limit-up-enabled": true, 
    "umask": 18, 
    "upload-slots-per-torrent": 14
}
After starting transmission I get following:

Code: Select all

updating blocklist
starting transmission
[01:42:35.119] Blocklist "level1.bin" updated with 224230 entries
[01:42:35.129] Blocklist "level1.bin" contains 224230 entries
[01:42:35.141] RPC Server: Adding address to whitelist: 127.0.0.1
[01:42:35.170] RPC Server: Adding address to whitelist: 192.168.1.*
[01:42:35.183] RPC Server: Adding address to whitelist: *.*.*.*
[01:42:35.278] RPC Server: Serving RPC and Web requests on port 9091
[01:42:35.294] RPC Server: Whitelist enabled
[01:42:35.308] Transmission 1.76 (9395) started
[01:42:35.479] DHT: Bootstrapping from 70 old nodes
[01:42:35.492] DHT: Reusing old id
[01:42:35.612] Blocklist "level1.bin" contains 224230 entries
[01:42:35.682] Loaded 2 torrents
[01:42:35.694] Using libcurl 7.19.7

I dont see why I am unable to reach transmission from internet
kovachs
Posts: 1
Joined: Wed Mar 17, 2010 12:20 am

Re: Cant acces WGUI from internet

Post by kovachs »

achlebin wrote:Hi I am using transmision and till I tried it from my LAN it worked like a charm but now it is imposible. I Get time out whenever I try to log to http://MY_IP:9091
I am runing transmission or asus router WL500W
settings.json

Code: Select all

{
    "alt-speed-down": 50, 
    "alt-speed-enabled": false, 
    "alt-speed-time-begin": 540, 
    "alt-speed-time-day": 127, 
    "alt-speed-time-enabled": false, 
    "blocklist-enabled": true, 
    "dht-enabled": true, 
    "download-dir": "\/tmp\/harddisk\/transmission\/download", 
    "encryption": 2, 
    "lazy-bitfield-enabled": true, 
    "message-level": 2, 
    "open-file-limit": 64, 
    "peer-limit-global": 250, 
    "peer-limit-per-torrent": 60, 
    "peer-port": 51413, 
    "peer-port-random-enabled": false, 
    "peer-port-random-high": 65535, 
    "port-forwarding-enabled": false, 
    "preallocation": 1, 
    "proxy": "", 
    "proxy-auth-enabled": false, 
    "proxy-auth-password": "", 
    "proxy-auth-username": "", 
    "proxy-enabled": false, 
    "proxy-port": 80, 
    "proxy-type": 0, 
    "ratio-limit": 2.0000, 
    "ratio-limit-enabled": false, 
    "rpc-authentication-required": false, 
    "rpc-bind-address": "0.0.0.0", 
    "rpc-enabled": true, 
    "rpc-password": "{49c5b153c05db9e39bf8f42ae5517ef6bce0a39cC9n\/U55G", 
    "rpc-port": 9091, 
    "rpc-username": "ach", 
    "rpc-whitelist": "127.0.0.1,192.168.1.*,*.*.*.*", 
    "rpc-whitelist-enabled": true, 
    "speed-limit-down": 500, 
    "speed-limit-down-enabled": false, 
    "speed-limit-up": 6, 
    "speed-limit-up-enabled": true, 
    "umask": 18, 
    "upload-slots-per-torrent": 14
    [url=http://www.voipreview.org/business-web-hosting-com]Business Web Hosting[/url]
}
After starting transmission I get following:

Code: Select all

updating blocklist
starting transmission
[01:42:35.119] Blocklist "level1.bin" updated with 224230 entries
[01:42:35.129] Blocklist "level1.bin" contains 224230 entries
[01:42:35.141] RPC Server: Adding address to whitelist: 127.0.0.1
[01:42:35.170] RPC Server: Adding address to whitelist: 192.168.1.*
[01:42:35.183] RPC Server: Adding address to whitelist: *.*.*.*
[01:42:35.278] RPC Server: Serving RPC and Web requests on port 9091
[01:42:35.294] RPC Server: Whitelist enabled
[01:42:35.308] Transmission 1.76 (9395) started
I dont see why I am unable to reach transmission from internet
[/size]
I haven't been able to reach transmission either. I am sooooo frustrated! Can anyone please help???
Longinus00
Posts: 137
Joined: Fri Aug 21, 2009 5:46 am

Re: Cant acces WGUI from internet

Post by Longinus00 »

Did you remember to forward the port through your router?
pezman
Posts: 12
Joined: Fri Jan 22, 2010 8:55 pm

Re: Cant acces WGUI from internet

Post by pezman »

Have you tried to turn the whitelist off.... Set it to false insted of adding the *.*.*.*
Else the configfile seems OK..
I would also check your router that you have setup it up with portforwarding
kev18
Posts: 1
Joined: Wed Nov 23, 2011 7:15 pm

Re: Cant acces WGUI from internet

Post by kev18 »

I am having the same problem on my RT-N16 wlan router. It was working perfectly for a while and then i cant log in from the web anymore?
Post Reply