new user, cant web remote to work, ports? please help

[gangr33n]

hi. the programs great ive used it on ubuntu no hassles, however ive now got a dedicated server and want to run the program via CLI and the remote web interface, but i cant get the program to run properly

[12:03:29.341] Couldn't bind port 51413 on 0.0.0.0: Address already in use
[12:03:29.342] Couldn't bind port 51413 on ::: Address already in use
[12:03:29.342] RPC Server: Adding address to whitelist: 127.0.0.1
[12:03:29.342] RPC Server: Adding address to whitelist: 192.168.1.11
[12:03:29.342] RPC Server: Serving RPC and Web requests on port 9091
[12:03:29.342] RPC Server: Whitelist enabled
[12:03:29.342] Transmission 1.75 (9117) started
[12:03:29.698] Port Forwarding (NAT-PMP): initnatpmp succeeded (0)
[12:03:29.698] Port Forwarding (NAT-PMP): sendpublicaddressrequest succeeded (2)
[12:03:38.438] Port Forwarding (UPnP): Found Internet Gateway Device "http://192.168.1.11:2869/"
[12:03:38.438] Port Forwarding (UPnP): Local Address is "192.168.1.20"
[12:03:43.442] Port Forwarding (UPnP): Port forwarding through "http://192.168.1.11:2869/", service "". (local address: 192.168.1.20:51413)
[12:03:43.443] Port Forwarding (UPnP): Port forwarding successful!
[12:03:43.443] Port Forwarding: State changed from "Not forwarded" to "Forwarded


this is the log i get when i run transmission-daemon -f, im trying to access the web interface with a local pc on the same switch, via port 9091 (**edit**). it is recieveing the request and refusing it so i get a 403 forbidden error. the port see ms to be open in netstat

any ideas? your help is much appreciated, thanks

[gangr33n]

yes sorry 9091

[asgard]

Add address range 192.168.1.* to the rpc-whitelist (settings.json).

[gangr33n]

i previously had but for now just have 192.168.1.11 which is the pc i was trying to connect on, there was no difference except the extra line in the start up script