Port Closed on Mac Snow Leopard

[CheekyB]

My port is closed (although it's previously been open). I have Automatically map port and randomize port enabled in my preferences. I'm getting the following error in my message log:

2010-11-21 05:30:05 +0300 port-forwarding.c:184 [Info] Port Forwarding: Stopped
2010-11-21 05:30:09 +0300 natpmp.c:70 [Info] Port Forwarding (NAT-PMP): initnatpmp succeeded (0)
2010-11-21 05:30:09 +0300 natpmp.c:70 [Info] Port Forwarding (NAT-PMP): sendpublicaddressrequest succeeded (2)
2010-11-21 05:30:09 +0300 upnp.c:113 [Info] Port Forwarding (UPnP): Found Internet Gateway Device "http://192.168.1.254:80/upnp/control/igd/wanpppc_1_1_1"
2010-11-21 05:30:09 +0300 upnp.c:115 [Info] Port Forwarding (UPnP): Local Address is "192.168.1.68"
2010-11-21 05:30:09 +0300 upnp.c:202 [Info] Port Forwarding (UPnP): Port forwarding through "http://192.168.1.254:80/upnp/control/igd/wanpppc_1_1_1", service "urn:schemas-upnp-org:service:WANPPPConnection:1". (local address: 192.168.1.68:49228)
2010-11-21 05:30:09 +0300 upnp.c:214 [Debug] Port Forwarding (UPnP): Port forwarding failed with error 501 (errno 0 - Unknown error: 0)
2010-11-21 05:30:09 +0300 upnp.c:217 [Debug] Port Forwarding (UPnP): If your router supports UPnP, please make sure UPnP is enabled!
2010-11-21 05:30:09 +0300 port-forwarding.c:95 [Info] Port Forwarding: State changed from "Not forwarded" to "Starting"

Please can someone advise as to what I should do?

Thanks
CB

[garrych]

T - 2.13.
Router - Zyxel P-660RT. UPnP Settings:
V Enable the Universal Plug and Play(UPnP) Service
V Allow users to make configuration changes through UPnP

Code: Select all

2010-12-12 23:16:20 +0300 session.c:624 [Info] Transmission: Transmission 2.13 (11501) started
2010-12-12 23:16:20 +0300 cache.c:253 [Debug] Cache: Maximum cache size set to 2.00 MB (128 blocks)
2010-12-12 23:16:20 +0300 rpc-server.c:789 [Info] RPC Server: Adding address to whitelist: 127.0.0.1
2010-12-12 23:16:20 +0300 rpc-server.c:962 [Info] RPC Server: Serving RPC and Web requests on port 9091
2010-12-12 23:16:20 +0300 net.c:415 [Debug] Transmission: Bound socket 10 to port 16881 on 0.0.0.0
2010-12-12 23:16:20 +0300 net.c:415 [Debug] Transmission: Bound socket 11 to port 16881 on ::
2010-12-12 23:16:20 +0300 fdlimit.c:854 [Debug] Transmission: setrlimit( RLIMIT_NOFILE, 1024 )
2010-12-12 23:16:20 +0300 fdlimit.c:862 [Debug] Transmission: socket limit is 100
2010-12-12 23:16:20 +0300 tr-dht.c:336 [Debug] DHT: Initializing DHT
2010-12-12 23:16:20 +0300 tr-dht.c:380 [Info] DHT: Reusing old id
2010-12-12 23:16:20 +0300 tr-dht.c:153 [Info] DHT: Bootstrapping from 40 nodes
2010-12-12 23:16:20 +0300 tr-dht.c:411 [Debug] DHT: DHT initialized
2010-12-12 23:16:20 +0300 tr-lpd.c:276 [Debug] LPD: Initialising Local Peer Discovery
2010-12-12 23:16:20 +0300 tr-lpd.c:344 [Debug] LPD: Local Peer Discovery initialised
2010-12-12 23:16:21 +0300 rpc-server.c:789 [Info] RPC Server: Adding address to whitelist: 127.0.0.1
2010-12-12 23:16:21 +0300 natpmp.c:70 [Info] Port Forwarding (NAT-PMP): initnatpmp succeeded (0)
2010-12-12 23:16:21 +0300 natpmp.c:70 [Info] Port Forwarding (NAT-PMP): sendpublicaddressrequest succeeded (2)
2010-12-12 23:16:21 +0300 upnp.c:113 [Info] Port Forwarding (UPnP): Found Internet Gateway Device "http://192.168.1.1:80/UD/?3"
2010-12-12 23:16:21 +0300 upnp.c:115 [Info] Port Forwarding (UPnP): Local Address is "192.168.1.101"
2010-12-12 23:16:21 +0300 upnp.c:202 [Info] Port Forwarding (UPnP): Port forwarding through "http://192.168.1.1:80/UD/?3", service "urn:schemas-upnp-org:service:WANIPConnection:1".  (local address: 192.168.1.101:16881)
2010-12-12 23:16:21 +0300 upnp.c:214 [Debug] Port Forwarding (UPnP): Port forwarding failed with error 718 (errno 0 - Unknown error: 0)
2010-12-12 23:16:21 +0300 upnp.c:217 [Debug] Port Forwarding (UPnP): If your router supports UPnP, please make sure UPnP is enabled!
2010-12-12 23:16:21 +0300 port-forwarding.c:95 [Info] Port Forwarding: State changed from "Not forwarded" to "Starting"
2010-12-12 23:16:29 +0300 natpmp.c:75 [Debug] Port Forwarding (NAT-PMP): readnatpmpresponseorretry failed.  natpmp returned -7 (the gateway does not support nat-pmp); errno is 61 (Connection refused)
2010-12-12 23:16:29 +0300 port-forwarding.c:95 [Info] Port Forwarding: State changed from "Starting" to "???"

Tried to disable/enable UPnP on router - no luck.
Version 2.12 worked.

[garrych]

I solved it for my case (P660RT). I disabled UPnP rules reserve

Code: Select all

sys upnp reserve 0

and cleared current nat rules

Code: Select all

ip nat server clear 1